Product

Generac’s 100 Amp single-phase NEMA 3R service rated automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source.

This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker and a Smart A/C module incorporating fuses and two terminal blocks for transfer switch connections.

Generac RXSW100A3SPD Details and Features

• Through the use of digital power technology, Generac's singe-phase service rated transfer switch has the ability to manage 4 individual HVAC loads with no additional hardware
• Designed for use with single-phase generators that utilize an Evolution or Nexus Controller
• Aluminum NEMA/UL Type 3R (indoor-outdoor) enclosure with electrostatically applied and baked power paint provides additional corrosion protection
• Simplify installation with a board that combines load management and transfer switch hardware
• Decreases transfer switch complexity
• Smaller fuses integrated into the control board

Surge Protection Built In

Generac RXSW100A3 Specifications

• Click here to see specs
• Product Length (in.) 14.6
• Product Width (in.) 7.1
• Product Height (in.) 20
• Product Weight (lbs) 22.5