racer1166
December 2nd, 2009, 01:40 PM
Used Generac stand by generator parts off of a 10 KW Mitsubishi 1.5L 30 HP unit. This unit has the Dayton brand name and is the model # 47M39B with serial # 31577XX. The Generac model # is 009891. All parts, with the exception of the rotor and stator should also be the same for the Dayton 20 KW stand by generator model # 4LM38B and the other related Generac private brands.
The motor is the 1.5L 30 HP industrial until that is based on the Mitsubishi car motor, but shares few if any parts. Since the industrial 1.5L motor was not imported into the US, parts are difficult to find and very expensive. Most of the parts from the motor and generator are in good condition. My motor needed a rebuild and I decided to replace the unit. Only the large and main components are listed, but just about everything is available on a first come basis. Please inquire if you need a part not listed. Buyer pays all shipping costs.
Please call Robert at 831-626-1438. For quickest response please do not email, call the # listed above.
Parts Listed:
Mountain Base Complete (frame) $50
Side enclosure door (repainted), 2 available $50, Price Each
End enclosure door (repainted) $50
Heavy duty stainless steel top $200
Motor vibration isolator, 2 available $10, Price Each
Generator vibrator isolator, 2 available $10, Price Each
Complete electrical control panel w/ wiring harness $200
Radiator $150
Radiator support $50
Coolant bottle and bracket $20
Engine heater $25
Engine valve cover $15
Engine supports (motor mounts), 2 available $5, Price Each
Exhaust flex pipe $10
Exhaust manifold $30
Exhaust heat shield $5
Starter $50
Complete natural gas intake system $150
Alternator $50
Muffler Assembly $75
Complete generator unit (rotor, stator) $500
Complete distributor assembly $500
The motor is the 1.5L 30 HP industrial until that is based on the Mitsubishi car motor, but shares few if any parts. Since the industrial 1.5L motor was not imported into the US, parts are difficult to find and very expensive. Most of the parts from the motor and generator are in good condition. My motor needed a rebuild and I decided to replace the unit. Only the large and main components are listed, but just about everything is available on a first come basis. Please inquire if you need a part not listed. Buyer pays all shipping costs.
Please call Robert at 831-626-1438. For quickest response please do not email, call the # listed above.
Parts Listed:
Mountain Base Complete (frame) $50
Side enclosure door (repainted), 2 available $50, Price Each
End enclosure door (repainted) $50
Heavy duty stainless steel top $200
Motor vibration isolator, 2 available $10, Price Each
Generator vibrator isolator, 2 available $10, Price Each
Complete electrical control panel w/ wiring harness $200
Radiator $150
Radiator support $50
Coolant bottle and bracket $20
Engine heater $25
Engine valve cover $15
Engine supports (motor mounts), 2 available $5, Price Each
Exhaust flex pipe $10
Exhaust manifold $30
Exhaust heat shield $5
Starter $50
Complete natural gas intake system $150
Alternator $50
Muffler Assembly $75
Complete generator unit (rotor, stator) $500
Complete distributor assembly $500