OrlokFarms
November 7th, 2007, 12:45 PM
Hi,All
First , I would like to Thank Mr. Kelly Myers for this great Website. Also thank you for all the folks that makes this Forum. Well my Generac Technician finally received the Circuit Card board that needs to replace the faulty one. After he installed the board, tested it, run it and do all that needs to be done......Guess what?????? That red light was still blinking . It puzzed him and dug more deeper into it...... On his last resort... he tested the SWITCH that you put either on Manual/off/automatic. He said that is weird , I guess he found a problem when he say's that..... He went to his truck got a new switch, replaced it. Put the new board. Fired it up. The green light comes on and it worked . Took the new board out and put the old board and fired it up . The green light came on and Everything worked . Including the weekly cycle.
What he told me was it was the switch. ........ I guess the Techical engineer he consulted in Generac also missed that part. He wanted me to run the generator this weekend unless we get a power outage before that and see what it does like the scenario without power. With Full load and let him know....... It sound's like my doctor... So folk's ..here's another problem solved.....
For Generac Technicians out there and my Fellow ZILLERGIAN'S or ZILLERAC'S (Just made it up ,pick-one or both) :.
Here's another actual OJT lesson learned...
P.S. Mr. Kelly Myers.....Thank You for your help and encouragement when I called you Monday morning...... Thank's again......
Orlokfarms
First , I would like to Thank Mr. Kelly Myers for this great Website. Also thank you for all the folks that makes this Forum. Well my Generac Technician finally received the Circuit Card board that needs to replace the faulty one. After he installed the board, tested it, run it and do all that needs to be done......Guess what?????? That red light was still blinking . It puzzed him and dug more deeper into it...... On his last resort... he tested the SWITCH that you put either on Manual/off/automatic. He said that is weird , I guess he found a problem when he say's that..... He went to his truck got a new switch, replaced it. Put the new board. Fired it up. The green light comes on and it worked . Took the new board out and put the old board and fired it up . The green light came on and Everything worked . Including the weekly cycle.
What he told me was it was the switch. ........ I guess the Techical engineer he consulted in Generac also missed that part. He wanted me to run the generator this weekend unless we get a power outage before that and see what it does like the scenario without power. With Full load and let him know....... It sound's like my doctor... So folk's ..here's another problem solved.....
For Generac Technicians out there and my Fellow ZILLERGIAN'S or ZILLERAC'S (Just made it up ,pick-one or both) :.
Here's another actual OJT lesson learned...
P.S. Mr. Kelly Myers.....Thank You for your help and encouragement when I called you Monday morning...... Thank's again......
Orlokfarms