PDA

View Full Version : Oil Consumption / break in time


Slice
July 31st, 2007, 09:23 AM
I have a 16kw air cooled bought this year, been running about 45 hrs. So far I have added two full quarts of oil to it, Normal or excessive. ?

Kelly Myers
July 31st, 2007, 11:17 AM
wayyyyyyyyyyyyyyyy excessive.

When you say "about 45 hours", could it have closer to 100-120 hours on it?

Any hour meter in use?

Slice
August 1st, 2007, 07:35 AM
No hr meter and closer to 70 hrs now I filled it full on Monday morning,, Ran it for 9 hrs Monday , 9 hours Tuesday checked it Tuesday evning after shut down and 4 hrs cool down time and now i am half a quart low. So if its way excessive whats the fix a new motor ? I still have full warrantys etc... Thanks for the advise.

Kelly Myers
August 1st, 2007, 11:41 AM
Well, Theres a lot of variables involved here. The main issue I run into is customers not filling them up to the proper level to begin with. If you used .5 qts in 50 hours, I would say that isn't out of the norm. The crankcase holds enough oil to allow long runtimes, and the generator WILL shut down when the oil gets below a safe level.

If in fact its losing oil at a quick rate, I would recommend doing a simple cylinder leakdown test. If that checks out fine, you may have an oil leak.

Slice
August 1st, 2007, 02:02 PM
Kelly, thanks for the insight info. I will do this change oil to full synthetic as per manual and see what happens from here, I am on generator power till home is finished and power compnay installs meter.. 30 days or so.....after this it will only be full back up during a storm etc..

dave
August 3rd, 2007, 08:22 AM
:eek: :eek: Oh no. Could have an out of warranty problem here. :confused: The transfer switch must be disconnected and you start it manually.